Made in the USA

A trivalent chromate conversion coating for all electrodeposited zinc surfaces.  It provides a highly polished surface while passivating zinc surfaces leaving a bluer finish than conventional trivalent chromates.  The results are a more consistent blue-bright finish that is reproducible load after load.   

It has much higher tolerance to impurities resulting in far less discoloration and yellowing associated with co-deposited iron.  Also, far fewer problems are encountered with zinc stripping from low current densities due to its low zinc removal properties.  

"TRIDIP 105, when used in conjunction with BRITEGUARD Yellow 133 and BRITEGUARD RP-81, provides a high corrosion resistant trivalent yellow conversion coating."

A liquid trivalent chromate conversion coating for all cyanide, and chloride zinc surfaces but especially for alkaline non-cyanide zinc.  It brightens and passivates zinc surfaces leaving an attractive, deep, blue film color, eliminating yellowing found with other chromates.   

A specially formulated one component liquid trivalent chromate conversion coating for all electrodeposited zinc surfaces.  It brightens and passivates zinc surfaces leaving a pronounced blue film.  It’s unique properties make it receptive to a variety of post-treatments.

Periodic additions and infrequent dumping allows heavy production without downtime for fresh make-up or without interruption of chromate quality.  

TRIDIP HC provides a greater degree of salt spray protection than other similar type chromates, typically as much as 50-80 hours without topcoat.

"When top coated with BRITEGUARD RP-81 topcoat, it can provide up to 350-450 hours to white corrosion and up to 1000 hours to red rust"

A specially formulated one component liquid, chrome VI-free, single-dip process that does not require additions of nitric acid.  This trivalent chromate conversion coating is ideal for cyanide, alkaline non-cyanide, chloride,  zinc/iron and zinc/cobalt electrodeposited zinc surfaces leaving a pronounced blue-bright film. 

When properly applied, it provides a finish that produces less than 5% white salts after  150 hours of neutral salt spray.  This exceeds auto industry specifications (GME-00252 and GMW-3044C).

"When used in conjunction with BRITEGUARD Yellow 133 and BRITEGUARD RP-81 or 89, provides a high corrosion resistant trivalent yellow conversion coating."

A chemical process that produces a highly corrosion resistant trivalent chromate conversion coating on aluminum and aluminum alloys.  It can be applied by brush, spray or immersion.  The color of the coating can be varied from faint blue to tan and iridescent.  It also makes an excellent base for organic coatings (paint & powder coat). 

chromitAL TCP   is a drop in replacement for conventional hex-chrome coatings and matches or exceeds the properties of hex-chrome solutions.