Below are just a few of the many advanced environmental products A Brite offers.

DROPOUT
Highly concentrated liquid designed to precipitate heavy metals from aqueous mediums. Solutions treated with DROPOUT provide heavy metal precipitates that have much lower solubility's and generate less sludge than their respective sodium and magnesium hydroxide precipitates. Effective over a wide pH range.

WTC-815
Concentrated liquid material unique to A Brite, that produces stronger coagulation and floc action than is possible from inorganic iron and aluminum salts. It produces large, rapidly settling floc, yet reduces sludge volume. Ideal for breaking highly chelated waste streams, substantially reducing sludge and removing turbidity in the water.

WTC-101
A concentrated solution of divalent metals and coagulants that are effective in breaking heavy metal chelates and oil emulsions from alkaline cleaner streams that are often associated with metal finishing waste streams.

WTC-104
Assist the anionic polymer in flocculation of heavy metal precipitates. WTC-104 helps produce a dense rapidly settling floc and does so with less sludge volume than inorganic seeds such as ferrous sulfate and alum.

WTC-111
Cationic flow aid used in place of inorganic iron and aluminum salts as a means to minimize sludge generation in hydroxide precipitation waste water treatment systems. Excellent coagulation properties when used in conjunction with anionic polymers.

WTF-350
A medium molecular weight, anionic polymer used as a precipitation aid and sludge conditioner. It is designed to be used at full strength, eliminating the need to make up stock solutions prior to use, thus completely eliminating the make up difficulties of powders and emulsions.

WTF-355
Super concentrated, low charge, anionic polymer used as a precipitation aid and sludge conditioner. This polymer usually performs well between the 4.5-12.0 pH range. It is particularly effective for applications with high total dissolved solids (TDS) and situations where water temperature is unusually high. It can be utilized on its own or with inorganic salts or other precipating aids such as DROPOUT.

WTF-371
Full charge emulsion anionic polymer designed for maximum performance heavy metal precipitation. Diluted stock solutions are used at the rate of 8-10 ppm. Finest and most economical emulsion polymer available.

WTD-530
Highly concentrated liquid, designed to defoam waste water streams. It is highly effective in defoaming cleaners, anodizing sealers, treated plating baths, screen room and other metal finishing effluent applications. Water based defoamer does not contain any silicone, silicates or petroleum products.

We have many years of experience helping our customers stay in compliance with the government. If you have question or concerns about your companies environmental waste issues, don't hesitate to call...we're here to help!