Listed below are but a few of the A Brite cleaners available for buffing compound applications.

ALKLEEN 002L    
A non-silicated, non-phosphated, non-etch, liquid cleaner designed to remove oils and light buffing compounds from aluminum, aluminum alloys, copper, brass and steel. It offers superior cleaning power in a slightly alkaline, low-foaming package. Can be utilized with air agitation.

ALKLEEN 006L    
A unique, super concentrated non-silicated, non-phosphated, non-etch, liquid "super cleaner" designed to remove heavily impacted buffing compounds from aluminum, aluminum alloys, brass, zinc diecast and steel. This versatile cleaner is ideal for use in ultrasonic applications.

ALKLEEN 007L    
A non-silicated, non-phosphated, non-etch, liquid cleaner designed to remove a oils, soils and heavily impregnated buffing compounds from aluminum, aluminum alloys and brass. Removes stubborn soils without causing downline incompatibility problems with etch, deoxidize, chemical polish or plating baths. It not only cleans, it also brightens the surface, thus, making it ideal for a bright final finish or for use on highly polished surfaces. It operates at a slightly acidic near neutral pH, making it safer & easier to handle than conventional cleaners.

ALKLEEN 008L    
A economical non-silicated, non-phosphated, non-etch, liquid cleaner. It's designed to remove a variety of oils, soils and heavily impacted buffing compounds from aluminum, aluminum alloys, brass, zinc diecast and steel. This cleaner can be used in ultrasonic applications. Requires a post-cleaner prior to further processing.

ALKLEEN 009L    
A silicated, phosphated, non-etch, low foaming liquid soak cleaner that removes a wide variety of oils, soils and heavy buffing compounds from steel, aluminum, aluminum alloys, brass and zinc diecast. Has tremendous capacity for penetrating surface soils, with reserve power to keep cleaning for extended periods of time, lengthening time between bath changes. Easy to waste treat.

ALKLEEN 1007    
A non-silicated, non-phosphated, non-chelated, non-etch, powdered alkaline cleaner to remove a wide variety of oils, soils and buffing compound from aluminum, aluminum alloys and brass & steel. It is heavy duty enough to tackle the toughest soils, yet safe on most surfaces. Its biodegradable formula is ideal for use as an aqueous cleaner in many applications.

MY-T-KLEEN 54
A mid-alkaline, non-chelated, general purpose, heavy duty soak cleaner. It is primarily intended for steel, however, it has many applications on copper and copper alloys as well. It offers exceptional cleaning power in both rack and barrel applications. It is available in liquid (My T Kleen 54L) and liquid additive (My T Kleen 54LA) formulations.

MY-T-KLEEN LC-15
A potassium based liquid for copper, steel high-powered surfactants and detergents allow soils to be held in solution without re-deposition occurring. It will not "jell up" with buffing compound or other solids after extended use. Compatible with most electrocleaners, thus rinsing between cleaners is not necessary. Its cleaning formulation makes it ideal as the cleaner prior to electroplating, phosphating or any application where a tough cleaning problem is encountered.

MY-T-KLEEN 750A
A potassium based, ultra high performance powdered soak cleaner for steel. Although designed for use on steel, in many cases it can be utilized for copper and copper alloys. It is designed to remove heavy soils and oils from hard to reach areas, such as crimped edges, tubular stock unusual shapes and blind holes. It's high-powered surfactants and detergents allow rapid penetration and emulsification of difficult to remove drawing and stamping compound, rust preventative oils and specifically, heavy impacted buffing compounds. Allows soils to be held in solution without redeposition occurring. Will not "jell-up" with compound or other solids.

If you have a unique cleaning requirement, we are capable of performing pilot testing to determine the feasibility of a cleaning challenge. We will then custom design and manufacture a product to meet specific needs.

A Brite offers a complete line of support products for your metal finishing and environmental needs. For additional information on the above mentioned products or to discuss your unique requirements, please contact our technical staff at 214/291-0400 or Toll Free 1-888-8A BRITE