Listed below are but a few of our over fifty different soak
cleaning products, each of which is specifically formulated for a
different application. Let A Brite help concur your toughest
cleaning challenges with one of our proven soak cleaning products. |
| ALKLEEN
006L, 007L, 008L, 009L |
Are unique, super concentrated non-silicated, non-phosphated, non-etch, liquid cleaners designed to remove a wide variety of oils, soils and heavily impacted buffing compounds from aluminum, aluminum alloys, brass, zinc diecast and steel. These versatile cleaners are ideal for use in ultrasonic applications. |
|
|
| CLEANER
153 |
A heavy duty, silicated, phosphated, non-chelated, non-etch, powdered alkaline cleaner designed to remove a wide variety of oils and soils compound from steel, aluminum, aluminum alloys, zinc die-cast and brass. It is approved under Boeing Aircraft specification for aluminum cleaners. It thoroughly cleans surfaces without attack on the base metal. |
|
|
| CLEANER
1583 |
A highly alkaline, heavily chelated, heavy duty cleaner for steel, aluminum and galvanized. Its detergents allow rapid penetration and emulsification of drawing and stamping compounds, rust preventative oils, shop soils and metal forming lubricants. |
|
|
| MY-T-KLEEN
54/54L/54LA |
General purpose products for steel and copper. Its detergents allow rapid penetration and emulsification of drawing and stamping compounds, rust preventative oils, buffing compounds and metal forming lubricants. It is designed to remove oils and soils from the inside of tubular steel. It is compatible with most electrocleaning compounds. |
|
|
| CLEANER
1335 |
A liquid cleaner and detergent booster for steel, copper, brass, and aluminum. It can be utilized as a soak cleaner, as a turbulent washer cleaner or as a spray cleaner in conventional or high-pressure spray washers, or in hand sprayers, swab or mop. It can also be added to iron phosphates to improve cleaning. |
|
|
MY-T-KLEEN
57L-AB |
Designed to remove soils from difficult areas such as blind holes, crimped edges and from the inside of tubular steel. It floats soils making it easy to remove or separate soils. It is compatible with all electrocleaners and subsequent down line processes. |
|
|
| CLEANER
1540 |
A unique, versatile multi-purpose cleaner primarily designed to be used on all ferrous metals. This versatile material functions in either immersion or spray applications. This unique surfactant system is very low foaming and while allowing complete cleaning at reduced temperatures. |
|
|
| MY-T-KLEEN
118 118L/118LA/118AZ |
These are highly alkaline, heavily chelated, non-phosphated, heavy duty soak cleaners for steel. They offer exceptional cleaning and descaling power in both rack and barrel applications. They are low wetted products that are well suited for the cleaning and removal of heavy rust as well as materials that have been heat treated and contain large amounts of scale. |
|
|
| MY-T-KLEEN
750A |
A potassium based powdered soak cleaner for steel, copper and copper alloys. It is designed to remove heavy soils and oils from hard to reach areas, such as crimped edges, tubular stock unusual shapes and blind holes. Detergents allow rapid penetration and emulsification of difficult to remove drawing and
stamping compound, rust preventative oils and specifically, heavy impacted buffing compounds. |
|
|
| MY-T-KLEEN
1003 |
An exceptional multi-purpose soak cleaner. It is designed to remove most standard shop oils and soils from copper, brass and aluminum, however it is equally effective on ferrous metals as well. |
|
|
| LA
CONCENTRATES |
These are highly concentrated liquid additives designed to be utilized with your caustic soda. These are
powerful surfactant packages that offer superior cleaning action compared to conventional cleaners. In many cases, cleaning can be done at lower
temperatures, which dramatically reduces the dependence on expensive energy. LA CONCENTRATES are available for both soak and electrocleaning applications. LA CONCENTRATES offer 25-50% savings compared to typical cleaner make up and maintenance. One drum is the equivalent of 2.5 drums of powdered product. This highly concentrated product reduces inventory and freight costs as well as storage space, while allowing the use of liquid caustic that you are currently purchasing for waste treatment. They can be metered in (along with caustic soda) as required to maintain proper bath concentration. |
| If
you have a unique cleaning requirement, we are capable of
performing pilot testing to determine the feasibility of a
cleaning challenge. We will then custom design and manufacture a
product to meet specific needs. A Brite offers a complete line of support products
for your metal finishing and environmental needs. For additional
information on the above mentioned products or to discuss your
unique requirements, please contact our technical staff at
214/291-0400 or Toll Free 1-888-8A BRITE |
