Below are just a few of the many advanced environmental
products
A Brite offers. |
| DROPOUT |
Highly concentrated liquid
designed to precipitate heavy metals from aqueous mediums. Solutions treated with DROPOUT
provide heavy metal precipitates that have much lower solubility's and generate less
sludge than their respective sodium and magnesium hydroxide precipitates. Effective over a
wide pH range. |
| SUPER
DROPOUT |
Contains an additional
proprietary heavy metal precipitant that functions synergistically with DROPOUT
resulting in vastly improved performance. Particularly effective in the presence of strong
chelators and sequestering agents and effective in metal removal from strippers and spent
electroless nickel solutions. |
| WTC-815 |
Concentrated
liquid material unique to A Brite, that produces stronger
coagulation and floc action than is possible from inorganic iron and aluminum salts. It
produces large, rapidly settling floc, yet reduces sludge volume. Ideal for breaking
highly chelated waste streams, substantially reducing sludge and removing turbidity in the
water. |
| WTF-350 |
A highly
concentrated anionic polymer that works effectively with any system and especially in
conjunction with DROPOUT precipitates. It is conveniently used at full strength
at a feed rate of 8 to 12 ppm. Very effective with all hydroxide heavy metal precipitates. |
| WTF-370 |
A full
concentration, high charge, powdered anionic polymer designed for economical heavy metal
precipitation. Unlike conventional powders, it mixes quickly and easily, providing a
general purpose, economical polymer. |
| WTF-371 |
Full charge
emulsion anionic polymer designed for maximum performance heavy metal precipitation.
Diluted stock solutions are used at the rate of 8-10 ppm. Optimum performance at pH ranges
8-10.5. |
| WTI-104 |
Assist the
anionic polymer in flocculation of heavy metal precipitates. WTI-104 helps
produce a dense rapidly settling floc and does so with less sludge volume than inorganic
seeds such as ferrous sulfate and alum. |
| WTI-111 |
Cationic floc
aid used in place or inorganic iron and aluminum salts as a means to minimize sludge
generation in hydroxide precipitation waste water treatment systems. Excellent coagulation
properties when used in conjunction with anionic polymers. |
| WTC-171 |
This cationic
polymer is designed to be used as a primary coagulant. Its excellent flocculation
properties over wide pH range make it effective in both acidic and alkaline media. |
| WTI-100 |
A concentrated
solution of divalent metals and coagulants that are effective in breaking heavy metal
chelates and oil emulsions from alkaline cleaner streams that are often associated with
metal finishing waste streams. |
| A
Brite offers a complete line of high technology products for your metal finishing and
environmental needs. For more information on our product line, specific products
(including those discussed above) or to discuss your special requirements, please contact
our technical staff at 214/638-0465 or Toll Free 1-888-8A BRITE |
