A Brite has advanced the science of aluminum cleaning with the
introduction of unique aluminum cleaning and deoxidizing
processes. These processes work faster, safer and more
economically than competitive processes. |
| CLEANER
153 |
Heavy duty, silicated, phosphated, non-chelated, non-etch, powdered alkaline cleaner designed to remove a wide variety of oils and soils from steel, aluminum, aluminum alloys, zinc die-cast and brass. It is approved under Boeing Aircraft specification for aluminum cleaners. |
|
|
ALKLEEN
101
CLEANER 1532 |
Exceptional phosphated, non-silicated, non-etch, heavy duty production cleaner designed to remove a wide variety of oils, soils and inks from aluminum, aluminum alloys, copper and steel. When used as directed, will remove stubborn soils without causing downline incompatibility problems with subsequent etch, deoxidize, chemical polish or plating baths. Alkleen 101 provides a super fine micro-etch finish under elevated temperatures. Ideal for parts that cannot be heavily etched yet require additional “bite” to assure adhesion of subsequent coatings. |
|
|
| ALKLEEN
108LF |
Removes oil, dirt, chemical stains, rust, heat scale and oxides while simultaneously conditioning the metal surface in a single operation. Produces a surface that offers low surface resistance that is ideal for spot welding, while brightening and conditioning action make parts more receptive to conversion coatings, anodizing, painting and plating processes. On zinc die-cast, when used as an acid dip after cleaning, it is ideal in removing smuts. |
|
|
| ALKLEEN
AC-7 |
Very unique, highly wetted, non-phosphated, non-etch, liquid cleaner designed to remove a wide variety of oils, soils and oxides from aluminum, aluminum alloys and steel. |
|
|
| ALKLEEN
006L |
Unique, super concentrated,
non-silicated, non-phosphated, non-etch, liquid “super cleaner” designed to remove heavily impacted buffing compounds from aluminum, aluminum alloys, brass, zinc diecast and steel. This versatile cleaner is ideal for use in ultrasonic applications. |
|
|
| ALKLEEN
008L |
Economical, non-silicated, non-phosphated, non-etch liquid cleaner designed to remove a variety of oils, soils and heavily impacted buffing compounds from aluminum, aluminum alloys, brass, zinc diecast and steel. This cleaner can be used in ultrasonic applications. Requires a post-cleaner prior to further processing. |
|
|
| ALKLEEN
009L |
Silicated, phosphated, non-etch, low foaming liquid soak cleaner that removes a wide variety of oils, soils and heavy buffing compounds from steel, aluminum, aluminum alloys, brass and zinc diecast. Has tremendous capacity for penetrating surface soils, with reserve power to keep cleaning for extended periods of time, lengthening time between bath changes. Easy to waste treat. |
|
|
| ALKLEEN
1007 |
Non-silicated, non-phosphated, non-chelated, non-etch, powdered alkaline cleaner to remove a wide variety of oils, soils and buffing compounds from aluminum, aluminum alloys, brass and steel. It is heavy duty enough to tackle the toughest soils, yet safe on most surfaces. Its biodegradable formula is ideal for use as an aqueous cleaner in many applications. |
|
|
ETCH
88
ALUMA ETCH 185
ALUMA ETCH 188 |
Blended powder, liquid or liquid additive (LA) materials, that contains caustic (except LA’s), sequestrates, extenders and builders, that is specifically designed to provide safe, uniform, consistent etching of aluminum and aluminum alloys. It provides the ultimate in etch technology. They produce varying depths of etch, from a light satin finish to deep stock removal, as in chemical milling. They etch at elevated concentrations of dissolved aluminum without having to dump or decant the etch bath. The will not cause dry-on stains or run down patterns even on large sheets and long transfer times. They are biodegradable products designed to produce little or no build-up on tank walls and heating coils. |
|
|
DEOXIDIZER
600
DEOXIDIZER 616 |
Liquid material designed to deoxidize/desmut aluminum prior to anodizing, bright dipping, plating, painting, chromating and chemical polishing. It is approved under Boeing Aircraft specifications. |
|
|
DEOXIDIZER
NC-620
DEOXIDIZER NC-637
ALDEOX 171 |
Liquid materials used as immersion or spray to remove oxide, smut and mill scale from aluminum prior to anodizing, bright dipping, plating, painting, chromating and chemical polishing. |
| If
you have a unique cleaning requirement, we are capable of
performing pilot testing to determine the feasibility of a
cleaning challenge. We will then custom design and manufacture a
product to meet specific needs. A Brite offers a complete line of support products
for your metal finishing and environmental needs. For additional
information on the above mentioned products or to discuss your
unique requirements, please contact our technical staff at
214/291-0400 or Toll Free 1-888-8A BRITE |
|
|
