The following are just a few of the complete line of aqueous
cleaning technology offered by A Brite. |
| BANANA
SPLIT |
A unique, highly concentrated, liquid, water
reducible cleaner. Banana Split is environmentally friendly and is safe for use on steel,
copper, brass and aluminum. Banana Split can be applied by spray or immersion with or
without ultrasonics. In addition, it's film, if unrinsed, provides mild corrosion
protection. |
|
|
| AQUAKLEEN
520 |
Liquid, multi-purpose, general
maintenance cleaner that is safe on virtually all surfaces. It can be applied by spray,
immersion, mopping or wiping. Aquakleen 520 is 100% biodegradable. |
|
|
| MY-T-KLEEN
58LS |
Highly wetted, non-silicated, liquid cleaner
primarily for steel. It provides rapid penetration and emulsification of drawing
compounds, rust preventatives, buffing compounds and metal forming lubricants. |
|
|
| SPRAKLEEN
722L |
Concentrated, liquid cleaner
for steel, copper, brass, aluminum and diecast. SpraKleen 722L can be used in
spray or immersion applications. Its unique surfactant system has been formulated to
remove drawing lubricants, quench oils, greases and buffing compounds. Super low foaming.
Biodegradable formula. |
|
|
| SPRAKLEEN
769 |
A powdered, slightly alkaline non-caustic
cleaner for steel, copper, brass and aluminum. Removes a wide
variety of soils quickly and easily
while leaving a short term protective film. Low foam formulation ideal for use in any type
of cleaning equipment. |
|
|
| ALKLEEN
002L |
A highly concentrated low foam
liquid for use on most surface. Ideal for ultrasonic, agitated and spray applications.
Very heavy duty cleaning capabilities. Compatible with subsequent processes. |
|
|
| ALKLEEN
110L |
Neutral liquid cleaner and detergent booster for
steel, copper, brass and aluminum. If offers excellent cleaning with extended cleaner life
and maximum economy. Operates at a wide variety of temperatures and concentrates. Removes
drawing lubes, quench oils, greases, and drawing compounds. |
| If
you have a unique cleaning requirement, we are capable of
performing pilot testing to determine the feasibility of a
cleaning challenge. We will then custom design and manufacture a
product to meet specific needs. A Brite offers a complete line of support products
for your metal finishing and environmental needs. For additional
information on the above mentioned products or to discuss your
unique requirements, please contact our technical staff at
214/291-0400 or Toll Free 1-888-8A BRITE |
|
|
